Original publication, Lakes, R. S. " Foam structures with a negative Poisson's ratio", Science, 235 p. 1038-1040 (1987).
Follow-on work, negative Poisson's ratio or auxetic in title or abstract, 2005 to Aug. 2008
Behavior modeling of laser micromachining in hybrid-layered manufacturing for components made of a material with a periodic microstructure, Wang, Feng (Department of Mechanical Engineering, University of Hong Kong); Chen, Ke-Zhang; Feng, Xin-An International Journal of Advanced Manufacturing Technology, v 38, n 1-2, July, 2008, p 85-92
Design of graded two-phase microstructures for tailored elasticity gradients, Zhou, Shiwei (School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney); Li, Qing Journal of Materials Science, v 43, n 15, August, 2008, Special Section: Interface Science, p 5157-5167
Elastic properties of cubic crystals: Every's versus Blackman's diagram, Paszkiewicz, T. (Fac. of Math. & Appl. Phys., Rzeszow Univ. of Technol., Rzeszow, Poland); Wolski, S. Journal of Physics: Conference Series, v 104, n 1, 2008, p 012038 (10 pp.)
The auxetic properties of a network of bending beams, Koenders, M.A. (Fac. of Sci., Kingston Univ., Kingston on Thames, UK); Gaspar, N. Physica Status Solid, v 245, n 3, March 2008, p 539-44
Negative compressibility, negative Poisson's ratio, and stability, Lakes, R. (Univ. of Wisconsin, Madison, WI, USA); Wojciechowski, K.W. Physica Status Solid, v 245, n 3, March 2008, p 545-51
On the auxetic properties of rotating rhombi and parallelograms: a preliminary investigation, Grima, J.N. (Dept. of Chem., Univ. of Malta, Msida, Malta); Farrugia, P.-S.; Gatt, R.; Attard, D. Physica Status Solid, v 245, n 3, March 2008, p 521-9
On the properties of auxetic meta-tetrachiral structures, Grima, J.N. (Dept. of Chem., Univ. of Malta, Msida, Malta); Gatt, R.; Farrugia, P.-S. Physica Status Solid, v 245, n 3, March 2008, p 511-20
On the atomic level deformations in the auxetic zeolite natrolite, Gatt, R. (Dept. of Chem., Univ. of Malta, Msida, Malta); Zammit, V.; Caruana, C.; Grima, J.N. Physica Status Solid, v 245, n 3, March 2008, p 502-10
The hexachiral prismatic wingbox concept, Martin, J. (Dept. of Aerosp. Eng., Univ. of Bristol, Bristol, UK); Heyder-Bruckner, J.-J.; Remillat, C.; Scarpa, F.; Potter, K.; Ruzzene, M. Physica Status Solid, v 245, n 3, March 2008, p 570-7
Auxetic properties and anisotropy of elastic material constants of 2D crystalline media, Jasiukiewicz, C. (Fac. of Math. & Appl. Phys., Rzeszow Univ. of Technol., Rzeszow, Poland); Paszkiewicz, T.; Wolski, S. Physica Status Solid, v 245, n 3, March 2008, p 562-9
Estimates for the localised stiffness and heterogeneity of auxetic foams, Gaspar, N. (Sch. of Eng., Univ. of Exeter, Exeter, UK) Physica Status Solid, v 245, n 3, March 2008, p 497-501
The low velocity impact response of auxetic carbon fibre laminates, Alderson, K.L. (Centre for Mater. Res. & Innovation, Univ. of Bolton, Bolton, UK); Coenen, V.L. Physica Status Solid, v 245, n 3, March 2008, p 489-96
An experimental study of thermal post-production processing of auxetic polypropylene fibres, Simkins, V.R. (Centre for Mater. Res. & Innovation, Univ. of Bolton, Bolton, UK); Ravirala, N.; Davies, P.J.; Alderson, A.; Alderson, K.L. Physica Status Solid, v 245, n 3, March 2008, p 598-605
Peculiarities of friction in auxetic composites, Shilko, S.V. (Metal-Polymer Res. Inst., Nat. Acad. of Sci. of Belarus, Gomel, Belarus); Petrokovets, E.M.; Pleskachevsky, Yu.M. Physica Status Solid, v 245, n 3, March 2008, p 83-9
Mechanical properties of auxetic tubular truss-like structures, Scarpa, F. (Dept. of Aerosp. Eng., Univ. of Bristol, Bristol, UK); Smith, C.W.; Ruzzene, M.; Wadee, M.K. Physica Status Solid, v 245, n 3, March 2008, p 584-90
Some new considerations concerning the Rayleigh-wave velocity in auxetic materials, Scarpa, F. (Dept. of Aerosp. Eng., Univ. of Bristol, Bristol, UK); Malischewsky, P.G. Physica Status Solid, v 245, n 3, March 2008, p 578-83
Fourth-rank tensors of [[V2]2]-type and elastic material constants for 2D crystals, Jasiukiewicz, C. (Rzeszow Univ. of Technol., Rzeszow, Poland); Paszkiewicz, T.; Wolski, S. Physica Status Solid, v 245, n 3, March 2008, p 557-61
Negative Poisson's ratios in siliceous zeolite MFI-silicalite, Sanchez-Valle, Carmen (Institute for Mineralogy and Petrology, ETH Zurich); Lethbridge, Zoe A. D.; Sinogeikin, Stanislav V.; Williams, Jennifer J.; Walton, Richard I.; Evans, Kenneth E.; Bass, Jay D. Journal of Chemical Physics, v 128, n 18, 2008, p 184503
Generalized viscoelastic designer functionally graded auxetic materials engineered/tailored for specific task performances, Hilton, Harry H. (Aerospace Engineering (AE), Technology Research, Education and Commercialization Center (TRECC), National Center for Supercomputing Applications (NCSA), University of Illinois at Urbana-Champaign (UIUC)); Lee, Daniel H.; El Fouly, Abdul Rahman A. Mechanics of Time-Dependent Materials, v 12, n 2, June, 2008, p 151-178
Seismic velocity structure around the Hyuganada region, Southwest Japan, derived from seismic tomography using land and OBS data and its implications for interplate coupling and vertical crustal uplift, Tahara, M. (Department of Earth and Planetary Sciences, Faculty of Sciences, Kyushu University); Uehira, K.; Shimizu, H.; Nakada, M.; Yamada, T.; Mochizuki, K.; Shinohara, M.; Nishino, M.; Hino, R.; Yakiwara, H.; Miyamachi, H.; Umakoshi, K.; Goda, M.; Matsuwo, N.; Kanazawa, T. Physics of the Earth and Planetary Interiors, v 167, n 1-2, March, 2008, p 19-33
First-principles study of the mechanical properties of NiAl microalloyed by M (Y, Zr, Nb, Mo, Tc, Ru, Rh, Pd, Ag, Cd), Zhang, Caili (College of Materials Science and Engineering, Taiyuan University of Technology); Han, Peide; Li, Jinmin; Chi, Mei; Yan, Lingyun; Liu, Yanping; Liu, Xuguang; Xu, Bingshe Journal of Physics D: Applied Physics, v 41, n 9, May 7, 2008, p 095410
Characteristics of 1-3-type ferroelectric ceramic/auxetic polymer composites, Topolov, V.Yu. (Department of Physics, Southern Federal University); Bowen, C.R. Modelling and Simulation in Materials Science and Engineering, v 16, n 1, Jan 1, 2008, p 015007
Evidence for fisher renormalization in the compressible 4 model, Troster, A. (Faculty of Physics, University of Vienna) Physical Review Letters, v 100, n 14, Apr 10, 2008, p 140602
Smart shape memory alloy chiral honeycomb, Hassan, M.R. (Department of Mechanical Engineering, University of Sheffield); Scarpa, F.; Ruzzene, M.; Mohammed, N.A. Materials Science and Engineering A, v 481-482, n 1-2 C, May 25, 2008, p 654-657
In-plane mechanical and thermal conductivity properties of a rectangular-hexagonal honeycomb structure, Bezazi, A. (Department of Aerospace Engineering, University of Bristol); Remillat, C.; Innocenti, P.; Scarpa, F. Composite Structures, v 84, n 3, July, 2008, p 248-255
Homogenization and equivalent in-plane properties of two-dimensional periodic lattices, Gonella, Stefano (School of Aerospace Engineering, Georgia Institute of Technology); Ruzzene, Massimo International Journal of Solids and Structures, v 45, n 10, May 15, 2008, p 2897-2915
Elastic properties of soft sphere crystal from Monte Carlo simulations, Tretiakov, Konstantin V. (Institute of Molecular Physics, Polish Academy of Sciences); Wojciechowski, Krzysztof W. Journal of Physical Chemistry B, v 112, n 6, Feb 14, 2008, p 1699-1705
Influence of wall constructions on the load-carrying capability of light-weight structures, Obrecht, H. (Technische Universitat Dortmund); Fuchs, P.; Reinicke, U.; Rosenthal, B.; Walkowiak, M. International Journal of Solids and Structures, v 45, n 6, Mar 15, 2008, p 1513-1535
Off-axis elastic properties and the effect of extraframework species on structural flexibility of the NAT-type zeolites: Simulations of structure and elastic properties, Williams, Jennifer J. (School of Engineering, Computer Science and Mathematics, University of Exeter); Smith, Christopher W.; Evans, Kenneth E.; Lethbridge, Zoe A. D.; Walton, Richard I. Chemistry of Materials, v 19, n 10, May 15, 2007, p 2423-2434
Structural and drug diffusion models of conventional and auxetic drug-eluting stents, Dolla, William Jacob S. (University of Missouri - Kansas City, Department of Mechanical Engineering); Fricke, Brian A.; Becker, Bryan R. Journal of Medical Devices, Transactions of the ASME, v 1, n 1, March, 2007, p 47-55
Positive development in negative materials, Alderson, Kim (Centre for Materials Research and Innovation, University of Bolton) Materials World, v 15, n 12, December, 2007, p 32-34
Crash performance of cellular foams with reduced relative density part 2: Rib deletion, Whitty, J.P.M. (School of Built Environment and Engineering, University of Bolton); Henderson, B.; Myler, P.; Chirwa, C. International Journal of Crashworthiness, v 12, n 6, , 2007, p 689-698
Deformability of several granitic rocks and gabbros in uniaxial tension, Weiren Lin (Japan Agency for Marine-Earth Sci. & Tech. Mononobe, Mononobe, Japan); Takahashi, M.; Fujn, Y.; Nishiyama, S.; Takemura, T. Journal of the Society of Materials Science, Japan, n 7, July 2007, p 654-9 Language: Japanese
Phonons in conventional and auxetic honeycomb lattices, Sparavigna, A. (Politecnico di Torino, Turin, Italy) Physical Review B (Condensed Matter and Materials Physics), v 76, n 13, 1 Oct. 2007, p 134302-1-6
Structure of the crust beneath the southeastern Tibetan Plateau from teleseismic receiver functions, Xu, Lili (Department of Earth, Atmospheric, and Planetary Sciences, Massachusetts Institute of Technology); Rondenay, Stephane; van der Hilst, Robert D. Physics of the Earth and Planetary Interiors, v 165, n 3-4, Dec 14, 2007, p 176-193
Loss of stability: A new look at the physics of cell wall behavior during plant cell growth, Wei, Chunfang (Department of Plant Biology, University of Vermont); Lintilhac, Philip M. Plant Physiology, v 145, n 3, November, 2007, p 763-772
Auxetic behavior of crystals from rotational degrees of freedom, Dmitriev, S.V. (Univ. of Tokyo, Tokyo, Japan) Ferroelectrics, v 349, 2007, p 33-44
Mechanical properties of superhard TiB2 coatings prepared by DC magnetron sputtering, Mikula, Marian (Institute of Materials, Machine Mechanics SAS); Grancic, Branislav; Bursikova, Vilma; Csuba, Adrian; Drzik, Milan; Kavecky, Stefan; Plecenik, Andrej; Kus, Peter Vacuum, v 82, n 2 SPEC. ISS., Oct 29, 2007, p 278-281
Molecular dynamics simulation of the elastic properties of metal nanowires in a transverse electric field, Zhu, Linli (Department of Mechanics, Lanzhou University); Qiao, Li; Zheng, Xiaojing Nanotechnology, v 18, n 38, Sep 26, 2007, p 385703
Auxetic materials, Alderson, A. (Centre for Materials Research and Innovation, University of Bolton); Alderson, K.L. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, v 221, n 4, 2007, p 565-575
The incremental bulk modulus, young's modulus and poisson's ratio in nonlinear isotropic elasticity: Physically reasonable response, Scott, N.H. (School of Mathematics, University of East Anglia) Mathematics and Mechanics of Solids, v 12, n 5, October, 2007, p 526-542
An analytical model for producing negative Poisson's ratios and its application in explaining off-axis elastic properties of the NAT-type zeolites, Williams, Jennifer J. (School of Engineering, Computer Science and Mathematics, The University of Exeter); Smith, Christopher W.; Evans, Kenneth E.; Lethbridge, Zoe A.D.; Walton, Richard I. Acta Materialia, v 55, n 17, October, 2007, p 5697-5707
Deformability of several granitic rocks and gabbros in uniaxial tension, Lin, Weiren (Kochi Inst, for Core Sample Res., Japan Agency for Marine-Earth Sci, and Tech. (JAMSTEC)); Takahashi, Manabu; Fujii, Yukiyasu; Nishiyama, Satoshi; Takemura, Lakato Zairyo/Journal of the Society of Materials Science, Japan, v 56, n 7, July, 2007, p 654-659 Language: Japanese
A new approach for optimizing the mechanical behavior of porous microstructures for porous materials by design, Bruck, Hugh A. (Department of Solid Mechanics, Materials, and Systems, Tel Aviv University); Gilat, Rivka; Aboudi, Jacob; Gershon, Alan L. Modelling and Simulation in Materials Science and Engineering, v 15, n 6, Sep 1, 2007, p 653-674
Negative group velocities of lamb-type waves in a glass/water/glass structure controlled by the thickness of water layer, Nishimiya, Kojiro (Graduate School of Systems and Information Engineering, University of Tsukuba); Yamamoto, Ken; Mizutani, Koichi; Wakatsuki, Naoto Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers, v 46, n 7 B, Jul 26, 2007, Ultrasonic Electronics, p 4483-4485
Relations between the thermal and mechanical properties of cast Zr-TM-Al (TM: Cu, Ni, or Co) bulk glassy alloys, Yokoyama, Yoshihiko (Advanced Research Center of Metallic Glasses, Institute for Materials Research, Tohoku University); Yamasaki, Toru; Liaw, Peter K.; Inoue, Akihisa Materials Transactions, v 48, n 7, July, 2007, p 1846-1849
Connected triangles exhibiting negative Poisson's ratios and negative thermal expansion, Grima, J.N. (Dept. of Chem., Malta Univ., Japan); Farrugia, P.-S.; Gatt, R.; Zammit, V. Journal of the Physical Society of Japan, v 76, n 2, Feb. 2007, p 025001-1-2
The effect of processing parameters on the mechanical properties of auxetic polymeric fibers, Alderson, K.L. (Centre for Materials Research and Innovation, University of Bolton); Alderson, A.; Davies, P.J.; Smart, G.; Ravirala, N.; Simkins, G. Journal of Materials Science, v 42, n 19, October, 2007, Special Section: Polymer Fibers 2006, p 7991-8000
Interlocking hexagons model for auxetic behaviour, Ravirala, N. (Centre for Materials Research and Innovation, University of Bolton); Alderson, A.; Alderson, K.L. Journal of Materials Science, v 42, n 17, August, 2007, p 7433-7445
Kinematical studies on rotation-based semi-auxetics, Lim, Teik-Cheng (School of Science and Technology, SIM University (UniSIM)) Journal of Materials Science, v 42, n 18, September, 2007, p 7690-7695
An improvement in shock absorbing behavior of polyurethane foam with a negative Poisson effect, Park, K.O. (Dept. of Biomed. Eng., Inje Univ., Gimhae, South Korea); Choi, J.B.; Park, J.-C.; Park, D.J.; Kim, J.K. Key Engineering Materials, v 342-342, 2007, p 845-8
The estimation of dispersion behavior in discrete fractured networks of andesite in Lan-Yu Island, Taiwan, Cheng-Haw, Lee (Department of Resource Engineering, National Chen Kung University); Chen-Chang, Lee; Bih-Shan, Lin Environmental Geology, v 52, n 7, July, 2007, p 1297-1306
Molecular dynamics simulations of auxetic ferrogel, Dudek, Miroslaw R. (Institute of Physics, Zielona Gora University); Grabiec, Bogdan; Wojciechowski, Krzysztof W. Reviews on Advanced Materials Science, v 14, n 2, 2007, p 167-173
Design of rotational particle structure with negative Poisson's ratio using numerical method, Lee, M.K. (Biomedical Res. Center, Korea Inst. of Sci. & Technol., Seoul, South Korea); Choi, J.B.; Choi, K.; Lim, H.N. Materials Science Forum, v 544-545, 2007, p 43-6
Natrolite: A zeolite with negative Poisson's ratios, Grima, Joseph N. (Department of Chemistry, University of Malta); Gatt, Ruben; Zammit, Victor; Williams, Jennifer J.; Evans, Kenneth E.; Alderson, Andrew; Walton, Richard I. Journal of Applied Physics, v 101, n 8, 2007, p 086102
An improvement in shock absorbing behavior of polyurethane foam with a negative poisson effect, Park, K.O. (Department of Biomedical Engineering, Inje University); Choi, J.B.; Park, J.-C.; Park, D.J.; Kim, J.K. Key Engineering Materials, v 342-343, 2007, p 845-848
Nonlinear analysis of the in-plane Young's moduli of two-dimensional cellular materials with negative Poisson's ratios, Hui Wan (Dept. of Mech. Eng., Wuhan Univ., China); Zhenyu Hu; Wujun Bao; Guoming Hu Key Engineering Materials, v 334-335, pt.1, 2007, p 157-60
Effects of orthotropy and variation of Poisson's ratio on the behaviour of tubes in pure flexure, Khurram Wadee, M. (School of Engineering, Computer Science and Mathematics, University of Exeter); Ahmer Wadee, M.; Bassom, Andrew P. Journal of the Mechanics and Physics of Solids, v 55, n 5, May, 2007, p 1086-1102
On the bulk modulus of open cell foams, Moore, B. (Department of Engineering Physics, University of Wisconsin-Madison, 541 Engineering Research Building); Jaglinski, T.; Stone, D.S.; Lakes, R.S. Cellular Polymers, v 26, n 1, 2007, p 1-10
Effect of material properties of composite restoration on the strength of the restoration-dentine interface due to polymerization shrinkage, thermal and occlusal loading, Borkowski, Krzysztof (School of Dentistry, The University of Adelaide); Kotousov, Andrei; Kahler, Bill Medical Engineering and Physics, v 29, n 6, July, 2007, p 671-676
Negative Poisson's ratio structures produced from zirconia and nickel using co-extrusion, Crumm, Aaron T. (Adaptive Materials Incorporated); Halloran, John W. Journal of Materials Science, v 42, n 4, February, 2007, p 1336-1342
Nonlinear analysis of the in-plane Young's moduli of two-dimensional cellular materials with negative Poisson's ratios, Wan, Hui (Department of Mechanical Engineering, Faculty of Engineering, Wuhan University); Hu, Zhenyu; Bao, Wujun; Hu, Guoming Key Engineering Materials, v 334-335 I, 2007, p 157-160
Mechanical behaviour of conventional and negative Poisson's ratio thermoplastic polyurethane foams under compressive cyclic loading, Bezazi, Abderrezak (Multidomain Cellular Solids Laboratory, Department of Mechanical Engineering, University of Sheffield); Scarpa, Fabrizio International Journal of Fatigue, v 29, n 5, May, 2007, p 922-930
Negative bending in seismic reflection associated with time-advanced and time-retarded fields, Ikelle, Luc T. (CASP Project, Department of Geology and Geophysics, Texas A and M University); Gangi, Anthony F. Geophysical Prospecting, v 55, n 1, January, 2007, p 57-69
Representation surfaces of Young's modulus and Poisson's ratio for BCC transition metals, Zhang, Jian-Min (College of Physics and Information Technology, Shaanxi Normal University); Zhang, Yan; Xu, Ke-Wei; Ji, Vincent Physica B: Condensed Matter, v 390, n 1-2, Mar 1, 2007, p 106-111
Elastic buckling of hexagonal chiral cell honeycombs, Scarpa, F. (Department of Mechanical Engineering, University of Sheffield); Blain, S.; Lew, T.; Perrott, D.; Ruzzene, M.; Yates, J.R. Composites Part A: Applied Science and Manufacturing, v 38, n 2, February, 2007, p 280-289
The properties of the Poisson's ratio of microcellular foams with low porosity: Non-stationary, negative value, and singularity, Chen, J.K. (Mechanics and Materials Science Research Center, Ningbo University); Zhu, J.; Wang, J.; Yuan, M.; Chu, H.J. Mechanics of Time-Dependent Materials, v 10, n 4, December, 2006, p 315-330
An analysis of contact deformation of auxetic composites, Shil'ko, S.V. (Belyi Metal-Polymer Research Institute, Belarus National Academy of Sciences); Petrokovets, E.M.; Pleskachevskii, Yu.M. Mechanics of Composite Materials, v 42, n 5, September, 2006, p 477-484
Dynamic response of chiral truss-core assemblies, Spadoni, A. (School of Aerospace Engineering, Georgia Institute of Technology); Ruzzene, M.; Scarpa, F. Journal of Intelligent Material Systems and Structures, v 17, n 11, November, 2006, p 941-952
Surface waves and mode conversion at a surface coated with an elastic heavy layer, Twarog, D. (H. Niewodniczanski Institute of Nuclear Physics PAN); Zielinski, P. Phase Transitions, v 79, n 6-7, Jun 1, 2006, p 577-583
Structural and acoustic behavior of chiral truss-core beams, Spadoni, A. (Sch. of Aerosp. Eng., Georgia Inst. of Technol., Atlanta, GA, USA); Ruzzene, M. Transactions of the ASME. Journal of Vibration and Acoustics, v 128, n 5, Oct. 2006, p 616-26
Auxetics at the molecular level: A negative Poisson's ratio in molecular rods, Pour, Nir (Department of Chemistry, Bar-Ilan University); Itzhaki, Lior; Hoz, Benaya; Altus, Eli; Basch, Harold; Hoz, Shmaryahu Angewandte Chemie - International Edition, v 45, n 36, Sep 11, 2006, p 5981-5983
A new model for analyzing the effect of fractures on triaxial deformation, Zhu, Wenlu (Department of Geology and Geophysics, Woods Hole Oceanographic Institution); Walsh, Joseph B. International Journal of Rock Mechanics and Mining Sciences, v 43, n 8, December, 2006, p 1241-1255
Evaluation of mechanical properties and negative poisson's ratio behavior in crystalline SiO2 materials: An atomistic approach, Kimizuka, Hajime (Department of Mechanical Engineering, Graduate School of Engineering, Osaka University); Ogata, Shigenobu; Shibutani, Yoji Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, v 72, n 6, June, 2006, p 823-829 Language: Japanese
Entire deformational characteristics and strain localization of jointed rock specimen in plane strain compression, Wang, Xue-Bin (Department of Mechanics and Engineering Science, Liaoning Technical University) Journal of Central South University of Technology (English Edition), v 13, n 3, June, 2006, p 300-306
Factors facilitating or limiting the use of AVO for coal-bed methane, Peng, Suping (China University of Mining and Technology, National Key Laboratory of Coal Resources and Safe Mining); Chen, Huajing; Yang, Ruizhao; Gao, Yunfeng; Chen, Xinping Geophysics, v 71, n 4, July/August, 2006, p C49-C56
Small amplitude dynamic properties of Ni48Ti46Cu 6 SMA Ribbons: Experimental results and modelling, Remillat, C. (Department of Aerospace Engineering, University of Bristol, Queens Building); Hassan, M.R.; Scarpa, F. Journal of Engineering Materials and Technology, Transactions of the ASME, v 128, n 3, July, 2006, p 260-267
Negative poisson's ratio polyester fibers, Ravirala, Naveen (Centre for Materials Research and Innovation, University of Bolton); Alderson, Kim L.; Davies, Philip J.; Simkins, Virginia R.; Alderson, Andrew Textile Research Journal, v 76, n 7, July, 2006, p 540-546
Mechanical model of two-dimensional cellular materials with negative Poisson's ratio, Lu, Zixing (School of Aeronautic Science and Technology, Beijing University of Aeronautics and Astronautics); Zhao, Yabin Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, v 32, n 5, May, 2006, p 594-597 Language: Chinese
Auxetic behavior from rotating triangles, Grima, Joseph N. (Department of Chemistry, University of Malta); Evans, Kenneth E. Journal of Materials Science, v 41, n 10, May, 2006, p 3193-3196
Negative Poisson's ratios in cellular foam materials, Grima, Joseph N. (Department of Chemistry, University of Malta); Gatt, Ruben; Ravirala, Naveen; Alderson, Andrew; Evans, K.E. Materials Science and Engineering A, v 423, n 1-2, May 15, 2006, Mechanical Behaviour of Micro- and Nano-Scale Systems, p 214-218
An alternative explanation for the negative Poisson's ratios in O-cristobalite, Grima, Joseph N. (Department of Chemistry, University of Malta); Gatt, Ruben; Alderson, Andrew; Evans, K.E. Materials Science and Engineering A, v 423, n 1-2, May 15, 2006, Mechanical Behaviour of Micro- and Nano-Scale Systems, p 219-224
Plastic failure analysis of an auxetic foam or inverted strut lattice under longitudinal and shear loads, Doyoyo, Mulalo (School of Civil and Environmental Engineering, Georgia Institute of Technology); Wan Hu, Jong Journal of the Mechanics and Physics of Solids, v 54, n 7, July, 2006, p 1479-1492
Direct, static measurement of single-crystal Young's moduli of the zeolite natrolite: Comparison with dynamic studies and simulations, Lethbridge, Zoe A.D. (Department of Chemistry, The Open University); Williams, Jennifer J.; Walton, Richard I.; Smith, Christopher W.; Hooper, Robert M.; Evans, Kenneth E. Acta Materialia, v 54, n 9, May, 2006, p 2533-2545
Buckling, postbuckling and imperfection-sensitivity: Old questions and some new answers, Obrecht, H. (Lehrstuhl fur Baumechanik.Statik, Universitat Dortmund); Rosenthal, B.; Fuchs, P.; Lange, S.; Marusczyk, C. Computational Mechanics, v 37, n 6, May, 2006, p 498-506
Correlation between Poisson's ratio and porosity in porous materials, Kovacik, J. Journal of Materials Science, v 41, n 4, February, 2006, p 1247-1249
Intermolecular interactions in solid benzene, Kearley, G.J. (Department of Radiation, Radionuclides and Reactors, Faculty of Applied Sciences, Delft University of Technology); Johnson, M.R.; Tomkinson, J. Journal of Chemical Physics, v 124, n 4, 2006, p 044514
Extreme Poisson's ratios and related elastic crystal properties, Guo, Cliff Y. (Department of Mechanical Engineering, N207 Engineering Building 1, University of Houston); Wheeler, Lewis Journal of the Mechanics and Physics of Solids, v 54, n 4, April, 2006, p 690-707
Polyurethane foam with a negative poisson's ratio for diabetic shoes, Park, K.O. (Department of Biomedical Engineering, Inje University); Park, J.C.; Choi, J.B.; Lee, S.J.; Choi, H.H.; Kim, J.K. Key Engineering Materials, v 288-289, 2005, p 677-680
The effect of matrix tension-compression nonlinearity and fixed negative charges on chondrocyte responses in cartilage, Likhitpanichkul, Morakot (Department of Biomedical Engineering, Columbia University); Guo, X. Edward; Mow, Van C. MCB Molecular and Cellular Biomechanics, v 2, n 4, December, 2005, p 191-204
Expanding materials and applications: exploiting auxetic textiles, Alderson, A. (Centre for Mater. Res. & Innovation, Bolton Univ., UK); Alderson, K. Technical Textiles International, Sept. 2005, p 29-34
Static and high constant strain rate loading on auxetic and conventional PU foam, Scarpa, Fabrizio (Department of Mechanical Engineering, Faculty of Engineering); Cannas, A.; Yates, J.R. Journal of Advanced Materials, v 37, n 3, July, 2005, p 11-14
On the auxetic properties of 'rotating rectangles' with different connectivity, Grima, J.N. (Dept. of Chem., Malta Univ., Msida, Malta); Gatt, R.; Alderson, A.; Evans, K.E. Journal of the Physical Society of Japan, v 74, n 10, Oct. 2005, p 2886-7
Effect of pore pressure on entire deformational characteristics of rock specimen, Wang, Xue-Bin (Department of Mechanics and Engineering Sciences, Liaoning Technical University) Shenyang Jianzhu Daxue Xuebao (Ziran Kexue Ban)/Journal of Shenyang Jianzhu University (Natural Science), v 21, n 6, November, 2005, p 625-629 Language: Chinese
Localized vibration in elastic structures with slowly varying thickness, Kaplunov, J.D. (Department of Mathematical Sciences, Brunel University); Rogerson, G.A.; Tovstik, P.E. Quarterly Journal of Mechanics and Applied Mathematics, v 58, n 4, November, 2005, p 645-664
Modelling of auxetic networked polymers built from calix[4]arene building blocks, Grima, J.N. (Department of Chemistry, University of Malta); Williams, J.J.; Gatt, R.; Evans, K.E. Molecular Simulation, v 31, n 13, Nov 1, 2005, p 907-913
Empirical modelling using dummy atoms (EMUDA): An alternative approach for studying "auxetic" structures, Grima, J.N. (Department of Chemistry, University of Malta); Gatt, R.; Bray, T.G.C.; Alderson, A.; Evans, K.E. Molecular Simulation, v 31, n 13, Nov 1, 2005, p 915-924
On the potential of connected stars as auxetic systems, Grima, J.N. (Department of Chemistry, University of Malta); Gatt, R.; Alderson, A.; Evans, K.E. Molecular Simulation, v 31, n 13, Nov 1, 2005, p 925-935
The role of particle softness in determining the value of Poisson's ratio for soft sphere solids, Branka, A.C. (Institute of Molecular Physics, Polish Academy of Sciences); Heyes, D.M. Molecular Simulation, v 31, n 13, Nov 1, 2005, p 937-944
Mechanical, rheological and transport properties of soft particle fluids, Heyes, D.M. (Division of Chemistry, School of Biomedical and Molecular Sciences, University of Surrey); Branka, A.C. Molecular Simulation, v 31, n 13, Nov 1, 2005, p 945-959
Auxetic strains - Insight from iso-auxetic materials, Blumenfeld, R. (Earth Science and Engineering, Imperial College) Molecular Simulation, v 31, n 13, Nov 1, 2005, p 867-871
Constitutive properties of contacting materials with a finite-sized microstructure, Koenders, M.A. (Department of Mathematics, Kingston University) Molecular Simulation, v 31, n 13, Nov 1, 2005, p 873-882
Dynamic simulations of potentially auxetic liquid-crystalline polymers incorporating swivelling mesogens, Aldred, P. (Department of Chemistry, Melville Laboratory for Polymer Science, University of Cambridge); Moratti, S.C. Molecular Simulation, v 31, n 13, Nov 1, 2005, p 883-887
Modelling of the mechanical and mass transport properties of auxetic molecular sieves: An idealised inorganic (zeolitic) host-guest system, Alderson, A. (Centre for Materials Research and Innovation, University of Bolton); Davies, P.J.; Evans, K.E.; Alderson, K.L.; Grima, J.N. Molecular Simulation, v 31, n 13, Nov 1, 2005, p 889-896
Modelling of the mechanical and mass transport properties of auxetic molecular sieves: An idealised organic (polymeric honeycomb) host-guest system, Alderson, A. (Centre for Materials Research and Innovation, University of Bolton); Davies, P.J.; Williams, M.R.; Evans, K.E.; Alderson, K.L.; Grima, J.N. Molecular Simulation, v 31, n 13, Nov 1, 2005, p 897-905
Mechanical performance of auxetic polyurethane foam for antivibration glove applications, Scarpa, F. (Department of Aerospace Engineering, University of Bristol); Giacomin, J.; Zhang, Y.; Pastorino, P. Cellular Polymers, v 24, n 5, 2005, p 253-268
An alternative explanation for the negative Poisson's ratios in auxetic foams, Grima, J.N. (Fac. of Sci., Malta Univ., Msida, Malta); Alderson, A.; Evans, K.E. Journal of the Physical Society of Japan, v 74, n 4, April 2005, p 1341-2
Effects of shear dilatancy on entire deformational characteristics of rock specimen, Wang, Xue-Bin (Dept. of Mechanics and Eng. Sci., Liaoning Tech. Univ.) Sichuan Daxue Xuebao (Gongcheng Kexue Ban)/Journal of Sichuan University (Engineering Science Edition), v 37, n 5, September, 2005, p 25-30 Language: Chinese
Constant strain-rate compression test of a fluid-saturated poroelastic sample with positive or negative Poisson's ratio, Sawaguchi, H. (Department of Mechanical Engineering, Iwate University); Kurashige, M. Acta Mechanica, v 179, n 3-4, November, 2005, p 145-156
Negative poisson's ratios in anisotropic linear elastic media, Ting, T.C.T. (Division of Mechanics and Computation, Stanford University); Barnett, D.M. Journal of Applied Mechanics, Transactions ASME, v 72, n 6, November, 2005, p 929-931
On the origin of auxetic behaviour in the silicate O-cristobalite, Grima, Joseph N. (Department of Chemistry, University of Malta); Gatt, Ruben; Alderson, Andrew; Evans, Kenneth E. Journal of Materials Chemistry, v 15, n 37, Oct 7, 2005, p 4003-4005
Models for compressible creep of thermoplastics, Kolupaev, V.A. (Deutsches Kunststoff-Institut, Abt. Technologie); Moneke, M. KGK Kautschuk Gummi Kunststoffe, v 58, n 10, October, 2005, p 518-523
Simulation of the densification of real open-celled foam microstructures, Brydon, A.D. (Theoretical Division, Los Alamos National Laboratory); Bardenhagen, S.G.; Miller, E.A.; Seidler, G.T. Journal of the Mechanics and Physics of Solids, v 53, n 12, December, 2005, p 2638-2660
The effect of the measurement frequency on the elastic anisotropy of fibre laminates, Kelly, A.; Hine, P.J.; Landert, M.; Ward, I.M. Journal of Materials Science, v 40, n 17, September, 2005, p 4461-4467
Composites with inclusions of negative bulk modulus: Extreme damping and negative poisson's ratio, Wang, Y.C. (Engineering Mechanics Program, Rheology Research Center, University of Wisconsin-Madison); Lakes, R.S. Journal of Composite Materials, v 39, n 18, 2005, p 1645-1657
Brillouin scattering study on the single-crystal elastic properties of natrolite and analcime zeolites, Sanchez-Valle, Carmen; Sinogeikin, Stanislav V.; Lethbridge, Zoe A.D.; Walton, Richard I.; Smith, Christopher W.; Evans, Kenneth E.; Bass, Jay D. Journal of Applied Physics, v 98, n 5, Sep 1, 2005, p 053508
Expanding materials and applications: Exploiting auxetic textiles, Andy (Centre for Materials Research and Innovation, University of Bolton); Alderson, Kim Technical Textiles International, v 14, n 6, September, 2005, p 29-34
Evaluation of hexagonal chiral structure for morphine airfoil concept, Bornengo, D. (Aerospace Engineering, University of Sheffield); Scarpa, F.; Remillat, C. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, v 219, n 3, June, 2005, p 185-192
Single fibre pullout tests on auxetic polymeric fibres, Simkins, V.R. (CMRI, University of Bolton); Alderson, A.; Davies, P.J.; Alderson, K.L. Journal of Materials Science, v 40, n 16, August, 2005, p 4355-4364
Poisson's ratio for anisotropic elastic materials can have no bounds, Ting, T.C.T. (Div. of Mech. & Comput., Stanford Univ., CA, USA); Tungyang Chen Quarterly Journal of Mechanics and Applied Mathematics, v 58, pt.1, Feb. 2005, p 55-71
High-pressure elasticity and auxetic property of O-cristobalite, Kimizuka, Hajime (Department of Mechanical Engineering, Graduate School of Engineering, Osaka University); Ogata, Shigenobu; Shibutani, Yoji Materials Transactions, v 46, n 6, June, 2005, p 1161-1166
Design of an artificial intervertebral disc exhibiting a negative poisson's ratio, Martz, Erik O. (Engineering Mechanics Program, Department of Engineering Physics, University of Wisconsin-Madison); Lakes, Roderic S.; Goel, Vijay K.; Park, Joon B. Cellular Polymers, v 24, n 3, 2005, p 127-138
Synthesis and characterization of liquid crystalline copolyesters containing horizontal and lateral rods in main chain (II), Liu, Yingliang (College of Materials Engineering, Zhengzhou University); Zhang, Lan; Shi, Jun; Cao, Shaokui Reactive and Functional Polymers, v 64, n 1, July, 2005, p 35-46
Poisson's ratio for anisotropic elastic materials can have no bounds, Ting, T.C.T. (Division of Mechanics and Computation, Stanford University); Chen, Tungyang Quarterly Journal of Mechanics and Applied Mathematics, v 58, n 1, February, 2005, p 73-82
Elastic constants of particleboard with ultrasonic technique, Najafi, Saeed Kazemi (Wood Paper Sci. and Technol. Dept., Fac. of Nat. Rsrc. and Mar. Sciences, Tarbiat Modarres Univ.); Bucur, Voichita; Ebrahimi, Ghanbar Materials Letters, v 59, n 16, Jul 1, 2005, p 2039-2042
Novel fabrication route for auxetic polyethylene. Part 1. Processing and microstructure, Alderson, K.L. (Ctr. for Mat. Res. and Innovation, University of Bolton); Webber, R.S.; Kettle, A.P.; Evans, K.E. Polymer Engineering and Science, v 45, n 4, April, 2005, p 568-578
Auxetic polypropylene films, Ravirala, N. (Ctr. for Mat. Res. and Innovation, University of Bolton); Alderson, A.; Alderson, K.L.; Davies, P.J. Polymer Engineering and Science, v 45, n 4, April, 2005, p 517-528
Mandel and Cryer problems of fluid-saturated foams with negative Poisson's ratio, Kurashige, M. (Department of Mechanical Engineering, Iwate University); Sato, K.; Imai, K. Acta Mechanica, v 175, n 1-4, March, 2005, p 25-43
Novel honeycombs with auxetic behaviour, Gaspar, N. (School of Engineering, Computer Science and Mathematics, University of Exeter); Ren, X.J.; Smith, C.W.; Grima, J.N.; Evans, K.E. Acta Materialia, v 53, n 8, May, 2005, p 2439-2445
Micromechanical analysis of lattice blocks, Aboudi, Jacob (Faculty of Engineering, Department of Solid Mechanics, Tel Aviv University); Gilat, Rivka International Journal of Solids and Structures, v 42, n 15, July, 2005, p 4372-4392
Controlling thermal expansion to obtain negative expansivity using laminated composites, Kelly, A. (Dept. of Mat. Science/Metallurgy, University of Cambridge); McCartney, L.N.; Clegg, W.J.; Stearn, R.J. Composites Science and Technology, v 65, n 1, January, 2005, p 47-59
Modelling of negative poisson's ratio nanomaterials: Deformation mechanisms, structure-property relationships and applications, Alderson, A. (Ctr. for Mat. Res. and Innovation, Bolton Institute); Alderson, K.L.; Evans, K.E.; Grima, J.N.; Williams, M. Journal of Metastable and Nanocrystalline Materials, v 23, 2005, p 55-58
Dynamic steady-state crack propagation in a transversely isotropic viscoelastic body, Khalmanova, Dinara (Department of Mathematics, Texas A and M University); Walton, Jay R. International Journal of Fracture, v 131, n 2, February, 2005, p 107-129